Friday, March 4, 2011

New Developments in Quantum Computing

At the Association for Computing Machinery's 43rd Symposium on Theory of Computing in June, associate professor of computer science Scott Aaronson and his graduate student Alex Arkhipov will present a paper describing an experiment that, if it worked, would offer strong evidence that quantum computers can do things that classical computers can't. Although building the experimental apparatus would be difficult, it shouldn't be as difficult as building a fully functional quantum computer.

Aaronson and Arkhipov's proposal is a variation on an experiment conducted by physicists at the University of Rochester in 1987, which relied on a device called a beam splitter, which takes an incoming beam of light and splits it into two beams traveling in different directions. The Rochester researchers demonstrated that if two identical light particles -- photons -- reach the beam splitter at exactly the same time, they will both go either right or left; they won't take different paths. It's another quantum behavior of fundamental particles that defies our physical intuitions.

The MIT researchers' experiment would use a larger number of photons, which would pass through a network of beam splitters and eventually strike photon detectors. The number of detectors would be somewhere in the vicinity of the square of the number of photons -- about 36 detectors for six photons, 100 detectors for 10 photons.

For any run of the MIT experiment, it would be impossible to predict how many photons would strike any given detector. But over successive runs, statistical patterns would begin to build up. In the six-photon version of the experiment, for instance, it could turn out that there's an 8 percent chance that photons will strike detectors 1, 3, 5, 7, 9 and 11, a 4 percent chance that they'll strike detectors 2, 4, 6, 8, 10 and 12, and so on, for any conceivable combination of detectors.

Calculating that distribution -- the likelihood of photons striking a given combination of detectors -- is a hard problem. The researchers' experiment doesn't solve it outright, but every successful execution of the experiment does take a sample from the solution set. One of the key findings in Aaronson and Arkhipov's paper is that, not only is calculating the distribution a hard problem, but so is simulating the sampling of it. For an experiment with more than, say, 100 photons, it would probably be beyond the computational capacity of all the computers in the world.

The question, then, is whether the experiment can be successfully executed. The Rochester researchers performed it with two photons, but getting multiple photons to arrive at a whole sequence of beam splitters at exactly the right time is more complicated. Barry Sanders, director of the University of Calgary's Institute for Quantum Information Science, points out that in 1987, when the Rochester researchers performed their initial experiment, they were using lasers mounted on lab tables and getting photons to arrive at the beam splitter simultaneously by sending them down fiber-optic cables of different lengths. But recent years have seen the advent of optical chips, in which all the optical components are etched into a silicon substrate, which makes it much easier to control the photons' trajectories.

The biggest problem, Sanders believes, is generating individual photons at predictable enough intervals to synchronize their arrival at the beam splitters."People have been working on it for a decade, making great things," Sanders says."But getting a train of single photons is still a challenge."

Sanders points out that even if the problem of getting single photons onto the chip is solved, photon detectors still have inefficiencies that could make their measurements inexact: in engineering parlance, there would be noise in the system. But Aaronson says that he and Arkhipov explicitly consider the question of whether simulating even a noisy version of their optical experiment would be an intractably hard problem. Although they were unable to prove that it was, Aaronson says that"most of our paper is devoted to giving evidence that the answer to that is yes." He's hopeful that a proof is forthcoming, whether from his research group or others'.


Source

Thursday, March 3, 2011

New Kinds of Superconductivity? Physicists Demonstrate Coveted 'Spin-Orbit Coupling' in Atomic Gases

In the researchers' demonstration of spin-orbit coupling, two lasers allow an atom's motion to flip it between a pair of energy states. The new work, published inNature, demonstrates this effect for the first time in bosons, which make up one of the two major classes of particles. The same technique could be applied to fermions, the other major class of particles, according to the researchers. The special properties of fermions would make them ideal for studying new kinds of interactions between two particles -- for example those leading to novel"p-wave" superconductivity, which may enable a long-sought form of quantum computing known as topological quantum computation.

In an unexpected development, the team also discovered that the lasers modified how the atoms interacted with each other and caused atoms in one energy state to separate in space from atoms in the other energy state.

One of the most important phenomena in quantum physics, spin-orbit coupling describes the interplay that can occur between a particle's internal properties and its external properties. In atoms, it usually describes interactions that only occur within an atom: how an electron's orbit around an atom's core (nucleus) affects the orientation of the electron's internal bar-magnet-like"spin." In semiconductor materials such as gallium arsenide, spin-orbit coupling is an interaction between an electron's spin and its linear motion in a material.

"Spin-orbit coupling is often a bad thing," said JQI's Ian Spielman, senior author of the paper."Researchers make 'spintronic' devices out of gallium arsenide, and if you've prepared a spin in some desired orientation, the last thing you'd want it to do is to flip to some other spin when it's moving."

"But from the point of view of fundamental physics, spin-orbit coupling is really interesting," he said."It's what drives these new kinds of materials called 'topological insulators.'"

One of the hottest topics in physics right now, topological insulators are special materials in which location is everything: the ability of electrons to flow depends on where they are located within the material. Most regions of such a material are insulating, and electric current does not flow freely. But in a flat, two-dimensional topological insulator, current can flow freely along the edge in one direction for one type of spin, and the opposite direction for the opposite kind of spin. In 3-D topological insulators, electrons would flow freely on the surface but be inhibited inside the material. While researchers have been making higher and higher quality versions of this special class of material in solids, spin-orbit coupling in trapped ultracold gases of atoms could help realize topological insulators in their purest, most pristine form, as gases are free of impurity atoms and the other complexities of solid materials.

Usually, atoms do not exhibit the same kind of spin-orbit coupling as electrons exhibit in gallium-arsenide crystals. While each individual atom has its own spin-orbit coupling going on between its internal components (electrons and nucleus), the atom's overall motion generally is not affected by its internal energy state.

But the researchers were able to change that. In their experiment, researchers trapped and cooled a gas of about 200,000 rubidium-87 atoms down to 100 nanokelvins, 3 billion times colder than room temperature. The researchers selected a pair of energy states, analogous to the"spin-up" and"spin-down" states in an electron, from the available atomic energy levels. An atom could occupy either of these"pseudospin" states. Then researchers shined a pair of lasers on the atoms so as to change the relationship between the atom's energy and its momentum (its mass times velocity), and therefore its motion. This created spin-orbit coupling in the atom: the moving atom flipped between its two"spin" states at a rate that depended upon its velocity.

"This demonstrates that the idea of using laser light to create spin-orbit coupling in atoms works. This is all we expected to see," Spielman said."But something else really neat happened."

They turned up the intensity of their lasers, and atoms of one spin state began to repel the atoms in the other spin state, causing them to separate.

"We changed fundamentally how these atoms interacted with one another," Spielman said."We hadn't anticipated that and got lucky."

The rubidium atoms in the researchers' experiment were bosons, sociable particles that can all crowd into the same space even if they possess identical values in their properties including spin. But Spielman's calculations show that they could also create this same effect in ultracold gases of fermions. Fermions, the more antisocial type of atoms, cannot occupy the same space when they are in an identical state. And compared to other methods for creating new interactions between fermions, the spin states would be easier to control and longer lived.

A spin-orbit-coupled Fermi gas could interact with itself because the lasers effectively split each atom into two distinct components, each with its own spin state, and two such atoms with different velocities could then interact and pair up with one other. This kind of pairing opens up possibilities, Spielman said, for studying novel forms of superconductivity, particularly"p-wave" superconductivity, in which two paired atoms have a quantum-mechanical phase that depends on their relative orientation. Such p-wave superconductors may enable a form of quantum computing known as topological quantum computation.


Source

Wednesday, March 2, 2011

New Generation of Optical Integrated Devices for Future Quantum Computers

Quantum computers, holding the great promise of tremendous computational power for particular tasks, have been the goal of worldwide efforts by scientists for several years. Tremendous advances have been made but there is still a long way to go.

Building a quantum computer will require a large number of interconnected components -- gates -- which work in a similar way to the microprocessors in current personal computers. Currently, most quantum gates are large structures and the bulky nature of these devices prevents scalability to the large and complex circuits required for practical applications.

Recently, the researchers from the University of Bristol's Centre for Quantum Photonics showed, in several important breakthroughs, that quantum information can be manipulated with integrated photonic circuits. Such circuits are compact (enabling scalability) and stable (with low noise) and could lead in the near future to mass production of chips for quantum computers.

Now the team, in collaboration with Dr Terry Rudolph at Imperial College, London, shows a new class of integrated divides that promise further reduction in the number of components that will be used for building future quantum circuits.

These devices, based on optical multimode interference (and therefore often called MMIs) have been widely employed in classical optics as they are compact and very robust to fabrication tolerances."While building a complex quantum network requires a large number of basic components, MMIs can often enable the implementation with much fewer resources," said Alberto Peruzzo, PhD student working on the experiment.

Until now it was not clear how these devices would work in the quantum regime. Bristol researchers have demonstrated that MMIs can perform quantum interference at the high fidelity required.

Scientists will now be able to implement more compact photonics circuits for quantum computing. MMIs can generate large entangled states, at the heart of the exponential speedup promised by quantum computing.

"Applications will range from new circuits for quantum computation to ultra precise measurement and secure quantum communication," said Professor Jeremy O'Brien, director of the Centre for Quantum Photonics.

The team now plans to build new sophisticated circuits for quantum computation and quantum metrology using MMI devices.


Source

Monday, February 28, 2011

Atomic Antennas Transmit Quantum Information Across a Microchip

The researchers have published their work in the scientific journalNature.

Six years ago scientists at the University of Innsbruck realized the first quantum byte -- a quantum computer with eight entangled quantum particles; a record that still stands."Nevertheless, to make practical use of a quantum computer that performs calculations, we need a lot more quantum bits," says Prof. Rainer Blatt, who, with his research team at the Institute for Experimental Physics, created the first quantum byte in an electromagnetic ion trap."In these traps we cannot string together large numbers of ions and control them simultaneously."

To solve this problem, the scientists have started to design a quantum computer based on a system of many small registers, which have to be linked. To achieve this, Innsbruck quantum physicists have now developed a revolutionary approach based on a concept formulated by theoretical physicists Ignacio Cirac and Peter Zoller. In their experiment, the physicists electromagnetically coupled two groups of ions over a distance of about 50 micrometers. Here, the motion of the particles serves as an antenna."The particles oscillate like electrons in the poles of a TV antenna and thereby generate an electromagnetic field," explains Blatt."If one antenna is tuned to the other one, the receiving end picks up the signal of the sender, which results in coupling." The energy exchange taking place in this process could be the basis for fundamental computing operations of a quantum computer.

Antennas amplify transmission

"We implemented this new concept in a very simple way," explains Rainer Blatt. In a miniaturized ion trap a double-well potential was created, trapping the calcium ions. The two wells were separated by 54 micrometers."By applying a voltage to the electrodes of the ion trap, we were able to match the oscillation frequencies of the ions," says Blatt.

"This resulted in a coupling process and an energy exchange, which can be used to transmit quantum information." A direct coupling of two mechanical oscillations at the quantum level has never been demonstrated before. In addition, the scientists show that the coupling is amplified by using more ions in each well."These additional ions function as antennas and increase the distance and speed of the transmission," says Rainer Blatt, who is excited about the new concept. This work constitutes a promising approach for building a fully functioning quantum computer.

"The new technology offers the possibility to distribute entanglement. At the same time, we are able to target each memory cell individually," explains Rainer Blatt. The new quantum computer could be based on a chip with many micro traps, where ions communicate with each other through electromagnetic coupling. This new approach represents an important step towards practical quantum technologies for information processing.

The quantum researchers are supported by the Austrian Science Fund FWF, the European Union, the European Research Council and the Federation of Austrian Industries Tyrol.


Source

Sunday, February 27, 2011

Etched Quantum Dots Shape Up as Single Photon Emitters

The conventional way to build quantum dots -- at NIST and elsewhere -- is to grow them like crystals in a solution, but this somewhat haphazard process results in irregular shapes. The new, more precise process was developed by NIST postdoctoral researcher Varun Verma when he was a student at the University of Illinois. Verma uses electron beam lithography and etching to carve quantum dots inside a semiconductor sandwich (called a quantum well) that confines particles in two dimensions. Lithography controls the dot's size and position, while sandwich thickness and composition -- as well as dot size -- can be used to tune the color of the dot's light emissions.

Some quantum dots are capable of emitting individual, isolated photons on demand, a crucial trait for quantum information systems that encode information by manipulating single photons. In new work reported inOptics Express, NIST tests demonstrated that the lithographed and etched quantum dots do indeed work as sources of single photons. The tests were performed on dots made of indium gallium arsenide. Dots of various diameters were patterned in specific positions in square arrays. Using a laser to excite individual dots and a photon detector to analyze emissions, NIST researchers found that dots 35 nanometers (nm) wide, for instance, emitted nearly all light at a wavelength of 888.6 nm. The timing pattern indicated that the light was emitted as a train of single photons.

NIST researchers now plan to construct reflective cavities around individual etched dots to guide their light emissions. If each dot can emit most photons perpendicular to the chip surface, more light can be collected to make a more efficient single photon source. Vertical emission has been demonstrated with crystal-grown quantum dots, but these dots can't be positioned or distributed reliably in cavities. Etched dots offer not only precise positioning but also the possibility of making identical dots, which could be used to generate special states of light such as two or more photons that are entangled, a quantum phenomenon that links their properties even at a distance.

The quantum dots tested in the experiments were made at NIST. A final step was carried out at the University of Illinois, where a crystal layer was grown over the dots to form clean interfaces.


Source

Saturday, February 26, 2011

Quantum Hot Potato: Researchers Entice Two Atoms to Swap Smallest Energy Units

Described in a paper published Feb. 23 byNature, the NIST experiments enticed two beryllium ions (electrically charged atoms) to take turns vibrating in an electromagnetic trap, exchanging units of energy, or quanta, that are a hallmark of quantum mechanics. As little as one quantum was traded back and forth in these exchanges, signifying that the ions are"coupled" or linked together. These ions also behave like objects in the larger, everyday world in that they are"harmonic oscillators" similar to pendulums and tuning forks, making repetitive, back-and-forth motions.

"First one ion is jiggling a little and the other is not moving at all; then the jiggling motion switches to the other ion. The smallest amount of energy you could possibly see is moving between the ions," explains first author Kenton Brown, a NIST post-doctoral researcher."We can also tune the coupling, which affects how fast they exchange energy and to what degree. We can turn the interaction on and off."

The experiments were made possible by a novel, one-layer ion trap cooled to minus 269 C (minus 452 F) with a liquid helium bath. The ions, 40 micrometers apart, float above the surface of the trap. In contrast to a conventional two-layer trap, the surface trap features smaller electrodes and can position ions closer together, enabling stronger coupling. Chilling to cryogenic temperatures suppresses unwanted heat that can distort ion behavior.

The energy swapping demonstrations begin by cooling both ions with a laser to slow their motion. Then one ion is cooled further to a motionless state with two opposing ultraviolet laser beams. Next the coupling interaction is turned on by tuning the voltages of the trap electrodes. In separate experiments reported inNature, NIST researchers measured the ions swapping energy at levels of several quanta every 155 microseconds and at the single quantum level somewhat less frequently, every 218 microseconds. Theoretically, the ions could swap energy indefinitely until the process is disrupted by heating. NIST scientists observed two round-trip exchanges at the single quantum level.

To detect and measure the ions' activity, NIST scientists apply an oscillating pulse to the trap at different frequencies while illuminating both ions with an ultraviolet laser and analyzing the scattered light. Each ion has its own characteristic vibration frequency; when excited, the motion reduces the amount of laser light absorbed. Dimming of the scattered light tells scientists an ion is vibrating at a particular pulse frequency.

To turn on the coupling interaction, scientists use electrode voltages to tune the frequencies of the two ions, nudging them closer together. The coupling is strongest when the frequencies are closest. The motions become linked due to the electrostatic interactions of the positively charged ions, which tend to repel each other. Coupling associates each ion with both characteristic frequencies.

The new experiments are similar to the same NIST research group's 2009 demonstration of entanglement -- a quantum phenomenon linking properties of separated particles -- in a mechanical system of two separated pairs of vibrating ions. However, the new experiments coupled the oscillators' motions more directly than before and, therefore, may simplify information processing. In this case the researchers observed quantum behavior but did not verify entanglement.

The new technique could be useful in a future quantum computer, which would use quantum systems such as ions to solve problems that are intractable today. For example, quantum computers could break today's most widely used data encryption codes. Direct coupling of ions in separate locations could simplify logic operations and help correct processing errors. The technique is also a feature of proposals for quantum simulations, which may help explain the mechanisms of complex quantum systems such as high-temperature superconductors.

In addition, the demonstration also suggests that similar interactions could be used to connect different types of quantum systems, such as a trapped ion and a particle of light (photon), to transfer information in a future quantum network. For example, a trapped ion could act as a"quantum transformer" between a superconducting quantum bit (qubit) and a qubit made of photons.


Source

Friday, February 25, 2011

Quantum Simulator Becomes Accessible to the World

The researchers have published their work in the scientific journalNature.

Many phenomena in our world are based on the nature of quantum physics: the structure of atoms and molecules, chemical reactions, material properties, magnetism and possibly also certain biological processes. Since the complexity of phenomena increases exponentially with more quantum particles involved, a detailed study of these complex systems reaches its limits quickly; and conventional computers fail when calculating these problems. To overcome these difficulties, physicists have been developing quantum simulators on various platforms, such as neutral atoms, ions or solid-state systems, which, similar to quantum computers, utilize the particular nature of quantum physics to control this complexity.

In another breakthrough in this field, a team of young scientists in the research groups of Rainer Blatt and Peter Zoller at the Institute for Experimental Physics and Theoretical Physics of the University of Innsbruck and the Institute of Quantum Optics and Quantum Information (IQOQI) of the Austrian Academy of Sciences have been the first to engineer a comprehensive toolbox for an open-system quantum computer, which will enable researchers to construct more sophisticated quantum simulators for investigating complex problems in quantum physics.

Using controlled dissipation

The physicists use a natural phenomenon In their experiments that they usually try to minimize as much as possible: environmental disturbances. Such disturbances usually cause information loss in quantum systems and destroy fragile quantum effects such as entanglement or interference. In physics this deleterious process is called dissipation. Innsbruck researchers, led by experimental physicists Julio Barreiro and Philipp Schindler as well as the theorist Markus Müller, have now been first in using dissipation in a quantum simulator with trapped ions in a beneficial way and engineered system-environment coupling experimentally.

"We not only control all internal states of the quantum system consisting of up to four ions but also the coupling to the environment," explains Julio Barreiro."In our experiment we use an additional ion that interacts with the quantum system and, at the same time, establishes a controlled contact to the environment," explains Philipp Schindler. The surprising result is that by using dissipation, the researchers are able to generate and intensify quantum effects, such as entanglement, in the system."We achieved this by controlling the disruptive environment," says an excited Markus Müller.

Putting the quantum world into order

In one of their experiments the researchers demonstrate the control of dissipative dynamics by entangling four ions using the environment ion."Contrary to other common procedures this also works irrespective of the initial state of each particle," explains Müller."Through a collective cooling process, the particles are driven to a common state." This procedure can be used to prepare many-body states, which otherwise could only be created and observed in an extremely well isolated quantum system.

The beneficial use of an environment allows for the realization of new types of quantum dynamics and the investigation of systems that have scarcely been accessible for experiments until now. In the last few years there has been continuous thinking about how dissipation, instead of suppressing it, could be actively used as a resource for building quantum computers and quantum memories. Innsbruck theoretical and experimental physicists cooperated closely and they have now been the first to successfully implement these dissipative effects in a quantum simulator.

The Innsbruck researchers are supported by the Austrian Science Fund (FWF), the European Commission and the Federation of Austrian Industries Tyrol.


Source